Over 200 Vehicles Coated
Central Valley Car Owners, is your car lacking shine? Did you know that washing a ceramic-coated car is at least 50%* easier? Let us coat your vehicle so you can have ease of washing & unmatched shine for years to come! Starting at $299!
Central Valley Auto Spa is proud to be the best Ceramic Coating Installers in Fresno!
Get A Free Quote In Seconds!
GET A FREE QUOTE
Ceramic Coating Process
Best Ceramic Coating Fresno
BASIC – Sport package
STANDARD – Bronze package
PREMIUM – Silver package
Ceramic Coating Add-Ons
Our goal is protect every surface on your vehicle. That’s why we carry coatings that were specifically designed for every surface of your car’s interior & exterior!
RainX doesn’t stand a chance against our professional glass coatings.
Protect your leather from dye-transfer, cracking, & more with our leather coating.
Wheel & caliper coatings
This coating will make cleaning your wheels & calipers a breeze!
Fresno's One-Stop Shop for Ceramic Coating & Graphene Coatings
about our products
Ceramic Pro once cured, is measured to have hardness above 9H. Normal clear coat has hardness between 2H and 4H. The increase in the hardness of the coated surface is vast. This makes it the hardest paint coating on the market today. This new glass shield prevents minor scratches to your clearcoat and acts as a sacrificial layer. This preserves the original factory paint.
Any surface scratches that happen in the coating are easily removed with light polishing which will not weaken the integrity of the original clear coat. With Ceramic Pro Coatings, your paint won’t fade or age due to the UV protection in the glass coating. Think of Ceramic Pro as an additional clear coat layer, only a lot harder. All of this allows for more peace of mind and a fuller enjoyment of your vehicle, even in harsh environments.
Don’t forget to ask about our Paint Protection Film services for impact protection.
CERAMIC COATINGS VS PAINT PROTECTION FILM
Ceramic coating vs wax
Think about wax and ceramic coatings as two different roads that lead to the same destination. They are different materials that perform the same task: protect your vehicle’s exterior surfaces. Both provide a sacrificial layer that is intended to shield your car’s surface from sun exposure, moisture and environmental pollution. Wax is the old, winding 2-lane road that leads into town and ceramic is the new, 6-lane wide expressway that gets you there in half the time.
Ceramic coating fresno questions
Your ceramic coating questions answered.
What is Ceramic Coating? Industry-grade ceramic coating is a chemical polymer solution that is applied to the exterior of a vehicle to protect it from external paint damage. Typically applied by hand, it blends with the paint of your car and creates an additional hydrophobic layer of protection.
Installing a ceramic coating is an extremely tedious process. Below is a breakdown of how ceramic coatings are installed.
100% Hand Car Wash
Using PH neutral soap and a clean wash mitt and safe towel to dry.
Clay bar treatment to mechanically decontaminate the paint followed by a chemical decontamination with iron removers.
Labor intensive Machine Paint Correction
We must make your car’s paint as close to perfect as possible so that we don’t seal those defects under the coating.
Surface Cleansing Coating Prep
We apply an alcohol-based cleansing solution to give the coating a proper surface to bond too. Unlike wax coatings bond to your clear coat.
Tedious Panel by Panel Installation
We apply the coating panel-by-panel with an applicator and special soft towels to prevent further damage.
Ceramic coatings last anywhere from 6 months to 7+ years depending on the formula.
The cost of a ceramic coating ranges from $700 – $3000 depending on two factors. How much paint correction is required & how much durability is desired.
Removing a ceramic coating requires labor intensive cutting and polishing with a machine polisher, pads, and abrasive compounds. You must be very careful to not go past the clearcoat.
A ceramic coating bonds to your clear coat and a wax does not. A wax also diminishes with heat and chemicals ceramic coatings are chemically and UV resistant.
The installation of a ceramic coating can take anywhere from 6-15 hours depending on the condition of your vehicles paint since most of the time is spent in paint correction pre-install.
The best way to maintain a ceramic coating is to hand wash your vehicle using a PH balanced soap diluted properly. You should consider drying the vehicle with a blower or extremely soft towel with little pressure.
WATER SPOT RESISTANCE
Improved formulation to increase the resistance of water spotting on coated vehicles
SUPERB HYDROPHOBIC QUALITY
Water contact angle that surpasses 110° and retaining close to this angle for a long periodDEEP GLOSS
Unmatched gloss that lasts years.
EASE OF MAINTENANCE
Surface stays clean for a longer period thanks to the anti-fouling effect